Cisco AP VCI 60 – “ServiceProvider”
I was helping another engineer troubleshoot a Cisco access point join problem. To my surprise I discovered the VCI was “Cisco AP c3500-ServiceProvider”
I can appreciate when I end a day with a quick reflection. Did I learn anything new today?
Yesterday was one of those days! I was assisting an engineer with an access point join problem. Of course, I took this opportunity to explain the access point join process and what to look for and how to troubleshoot.
We use DHCP option 43 as our means of joining Cisco access points to our network. After peeking at the DHCP configuration, more specifically the option 43 and VCI string, everything looked good. Other 3500s were joining fine, just these handful of access points were not joining.
I do the typical console into the AP. I see nothing of interest. The access point is not getting the controller IP from DHCP. So we span the switch port of the access point to sniff the access point traffic. I am curious as to what the access point is sending in the DHCP request packet.
To my surprise, the VCI 60 is showing “Cisco AP c3500-ServiceProvider”. Oh, there is my problem! Mistakenly a number of “ServiceProvider” access points were mixed in our access point shipment.
If you have access points not joining, just something to add to your troubleshooting check list!
Reader Comments (2)
Geroge:
Thank you very much. Very interesting.
I think this problem happens if you are configuring say a windows server as DHCP.
But if you are using a cisco switch for the DHCP I don't think that the issue will happen, right?
You still need to configure VCI if you use a switch, so yes it would apply.